Catalogo

Energy absorber with tension indicator

Art. 423





Listino

Codice Modello Info Listino
423 Energy absorber with tension indicator € 165,00

Useful for reducing the loads transferred to the supporting structure, recommended for the anchor lines with total length up to 8 m for concrete and up to 12 m for wood.
The absorber incorporates a tension indicator that gives the correct tensioning to the rope while assembling. Two holes at the end of the tie bars indicate that the rope is correctly tensioned when they can be seen completely from outside the device.
The rope can be tensioned through the incorporated tensioning device by using the energy absorber. In this case, as shown in the figure below, it will suffice to tension the rope till the two holes at the ends of the tie bars are completely visible on the device.


Further, in case of fall, the energy absorber is permanently deformed and cannot be used anymore; it must be replaced and the anchor line must be inspected.


     
     
     
     
     
     


Prodotti correlati

424
Kit dissipatore di energia
Kit dissipatore di energia
424C
Energy absorber kit
Energy absorber kit

Gallery

Catalogo